Job Hazard Analysis (JHA) #28

JHA Header Information

Identified Hazards & Required Controls (Most Critical First)[cite: 7]
Task 1: Site Survey

Meet with customer representative to determine site specific hazards. Where customer and Yaskawa safety practices differ, Yaskawa associate shall follow the more restrictive safety requirements. Perform a site walk-around to understand the hazards the customer presents and identify any other hazards

Energy / Category Hazard Description Risk Level Mandatory Control Measures
Other PV sites can have multiple hazards including trip, animal/insects, electrical, construction activity Low (Score: 9) Inspect site for hazards and determine required controls.
Task 2: Verify Lockout has been achieved

The Yaskawa associate shall deem the equipment energized until a zero energy state has been established and verified. The customer will lockout all combiner boxes or other upstream power supply devices and give the keys to the Yaskawa engineer. The customer shall also supply a copy of the one-line drawing showing all the locations that have been locked out. The Yaskawa engineer places the keys into a lockbox and places their own lock and tag on the lockbox. The Yaskawa engineer dons the required PPE and uses voltage rated equipment to verify an absence of voltage to the drive.

Energy / Category Hazard Description Risk Level Mandatory Control Measures
Electric Shock or Arc Flash Electric Shock / Arc Flash High (Score: 40) Verify the customer locked out all upstream power supply devices. Refer to one-line drawing to ensure this was done. While wearing appropriate PPE and using voltage rated equipment, verify absence of power

Station Details

Station Controls

Signs Barriers Other Controls

Environmental Factors

Workstation Images

Required Competencies

Tools Used

Chemicals Used

Job Tasks and Hazards

Required PPE

Eye Protection
Safety Glasses w/ Shields
Vented Goggles
Non-Vented Goggles
Welding Helmet/Shield
Laser Protection
UV Protection
Face Shield
Head Protection
Type 2 Class G
Bump Cap
Hearing Protection
Hearing Protection
Respiratory Protection
Filtered Face Mask
Half-Face P100
Organic Vapor
Foot Protection
Toe Protection
Electrical Hazard
ESD
Metatarsal
Puncture Resistant
Chemical Resistant
Electrical Protection
Class 0 Gloves
Class 1 Gloves
Class 2 Gloves
CAT 1 Arc
CAT 2 Arc
CAT 3 Arc
CAT 4 Arc
Natural Fiber
Arc-Rated Clothes

Ergonomic Assessment

Wrists
PosturesForceDurationFrequency
Left Wrist
Right Wrist
Ergonomic Stressors